Thermal Grease

Thermal Grease

share

Thermal Grease

  • Detail
  • Parameters
  • Review


Thermal Conductive Silicone Grease·Parameter Table
ProjectExterior

Thermal

Conductivity

Thermal

Impedance

Unit/W/mk℃·in²/W
StandardVisually

ASTM

D5470

ASTM
D5470
YS112White10.055
YS111Grey1.50.078
YS121White2.0/
YS122Grey2.50.035
YS133Grey3.20.013
YS143Grey4.0/
YS152Grey5.00.028
YS164Grey6.00.025


Flammability Rating:U94 V-0


Temperature Resistant:-60~200℃



Legal Disclaimer



The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes. Pleasecontact usor e-mail:yslizi0211@gmail.com to determine product availability.


* Product Note


Purchasing information

Packing specification: 30ml/ 1kg, 2kg,5kg,10kg.


Instructions

Clean the application surface first, then stir the silicone grease evenly, and then apply the silicone grease to the surface by dot coating, brushing or screen printing. If screen printing is used, it is recommended to use 60 ~ 80 mesh nylon screen, and a rubber scraper with a hardness of about 70. When coating, apply silicone grease at about 45 degrees to the coated surface. After the operation, unused products should be sealed and stored in time.


Shelf life & Storage

Shelf life of the product is 12 months after date of shipment. Store in a cool, dry, well ventilated place.


If you need to know more parameters, you can contact Yunshang New Materials: 17620189284, email: yslizi0211@gmail.com.





Thermal Conductivity
1-6W
Temperature resistance range
-40-200°
Color
Grey/White
Flammability rating
94-V0
Custom Made
Color
Specification
1/2/5/10kg/can
Get a Quote